Atdec Telehook TH-1026-VF Installation manual - Manual (Page 2)

M5 Security
Screw
Display
Display Plate Side Flange
Wall Plate Slot
Display Plate
Back of Display
Mounting Screw
TOP
Step 3. Mounting the Display Plate
With the Display Plate attached
to the Display, lift the Display,
slide into the Wall plate. Ensuring
that the side flanges engage into
wall plate slots.
Step 4. Attaching Display to Wall Plate
To properly secure the display
to the wall it is recommended
to used the two M5 security
screws to securely attach the
two plates together.
Step 5. Security Option
Installation Complete
No portion of this document or any artwork contained herein should be reproduced in anyway without the express written consent Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without noticed. Published 01.03.10 ©