B&W Trailer Hitches Companion Flatbed Model 3050 - Manual

Companion TM Flatbed 5th Wheel RV Hitch Installation Instructions
Fits all Flatbed Trucks Equipped with
the Turnover Ball Gooseneck Hitch
AssEMBly InsTRuCTIons
Model 3050
Bolt the sides to the center section
using 6 of the 1-1/2” bolts as show in
the above illustration. Secure all bolts
on the inside of the center section with
a lock washer and nut. Make sure the
center section is held tight against the
lower part of each side while the bolts
are tightened to 80 ft. lbs.
sTEp:1 sTEp: 2
sTEp: 3
Remove the Turnover ball
from the hitch reciever
socket.
sTEp: 4
Place the Companion Flat
Bed base unit into the
receiver socket.
sTEp: 5
Engage the latch pin.
Install the support arms to the center
section and to each side of the base
using the 10 remaining 1 1/2” bolts
as shown in the illustration. Secure all
bolts on the inside of the support arms
with lock washers and nuts, tighten to
80 ft. lbs.
Call or Email us for Installation Support
B&W Trailer Hitches
1216 Hwy 224 / PO Box 186
Humboldt, KS 66748
620.473.3664
800.248.6564
Fax: 620.473.3766
[email protected]
www.turnoverball.com
pART nuMBERs: RVB3055 & RVC3006
22,000 LBS TRAILER WEIGHT / 5,500 LBS TRAILER TONGUE WEIGHT