Rsl-2702 – Cortech RSL-2702 User Manual
Page 3
RSL-2702
4
3
3. INCLUDED WITH LAMINATOR
4. PRODUCT IDENTIFICATION
5. LOADING FILM
1. As shown in picture 1, insert auto grips onto the upper/lower film shaft.
2. As shown in picture 2, using the special tool, fix the auto grips on the
film shaft with set-screws.
3. Set the glossy side of the upper and lower film towards the heat rollers.
( Glossy side is PET film and matte side is thermal polymer laminating
adhesive)
4. Center film as shown in picture 3 and 4.
Picture 1
Picture 2
Picture 3
Picture 4
NO
PART NAME
NO
PART NAME
1
UPPER FILM
7
LOWER FILM
2
TAKE-UP BOBBIN
8
GUIDE-DOCUMENT
3
IDLE BAR
9
HANDLE-TENSION
4
HOT ROLLER
10
PRESSURE LEVER
5
SAFETY COVER
11
CONTROL PANEL
6
FRONT-TABLE
12
KNOB-TENSION
Power supply:
220V~240V
Power supply:
100V~120V
PART NAME
EA
REMARK
PART NAME
EA
REMARK
FUSE(65TS)
(AC250V 10A)
1
1
FUSE(65TS)
(AC250V 20A)