Milton CAT 950K - Manual (Page 16)

950K Wheel Loader Specifications
Dimensions
All dimensions are approximate and based on L3 Michelin XHA2 tires.
10
17
16
15
19
11
18
1 2
5
3 12
13
14 9 4 8
6 7
1 Height to Top of ROPS 3356 mm 11'0"
2 Height to Top of Exhaust Pipe 3099 mm 10'2"
3 Height to Top of Hood 2415 mm 7'11"
4 Ground Clearance With 23.5R25 (See Tire Option Chart for Other Tires) 397 mm 1'3"
5 B-Pin Height – Standard 4021 mm 13'2"
B-Pin Height – High-Lift 4526 mm 14'10"
6 Center Line of Rear Axle to Edge of Counterweight 1905 mm 6'3"
7 Wheelbase 3350 mm 10'11"
8 B-Pin Height @ Carry – Standard 659 mm 26"
9 Center Line of Rear Axle to Hitch 1510 mm 4'11"
10 Rack Back @ Maximum Lift 59 degrees
11 Dump Angle @ Maximum Lift 51 degrees
12 Rack Back @ Carry 46 degrees
13 Rack Back @ Ground 38 degrees
14 Height to Center Line of Axle 688 mm 2'3"
15 Lift Arm Clearance 3275 mm 10'7"
Lift Arm Clearance @ High Lift 3625 mm 11'9"
Turning Radius
All dimensions are approximate and based on L3 Michelin XHA2 tires.
16 Clearance Circle to Outside of Tires 5952 mm 19'6"
17 Clearance Circle to Inside of Tires 3233 mm 10'7"
18 Width Over Tires 2719 mm 8'11"
19 Clearance Circle to Outside Edge of Counterweight 6025 mm 19'9"
16