Milton CAT 994F - Manual (Page 24)

24 994F Wheel Loader specifications
Operating Specifications – High Lift
For machines equipped with 53.5/85-57, 76 PR L-5 tires – see additional tables for other tire sizes
Coal Bucket
Narrow Bucket Wide Bucket (6200 mm/
(5640 mm/222 in) (6200 mm/244 in) 244 in)
Straight
Edge
Coal
Spade Edge Spade Edge Bucket
Rock Bucket Rock Bucket Teeth &
Teeth & Segment Teeth & Segment Segment
Rated capacity (§) m 3 14 15 17 19 18 19 31
yd 3 18.5 19.5 22.5 25 23.5 25 41
Width (§) mm 5640 5640 5640 5640 6200 6200 6200
ft/in 18' 6" 18' 6" 18' 6" 18' 6" 20' 4" 20' 4" 20' 4"
Struck capacity (§) m 3 11 12 14 15 14.5 15 27
yd 3 14.4 15.7 18.3 19.6 19 19.6 35.3
Dump clearance at full lift mm 6110 6110 6002 5895 6002 5902 5974
and 45 ° discharge (§) ft/in 20' 0" 20' 0" 19' 8" 19' 4" 19' 8" 19' 4" 19' 7"
Reach at full lift mm 2632 2632 2721 2827 2721 2839 2867
and 45
° discharge (§)
ft/in 8' 8" 8' 8" 8' 11" 9' 3" 8' 11" 9' 4" 9' 5"
Reach with lift arms mm 5556 5556 5696 5846 5696 5850 5819
horizontal and bucket level ft/in 18' 2" 18' 2" 18' 8" 19' 4" 18' 8" 19' 2" 19' 1"
Digging depth (§) mm 123 123 123 123 123 123 78
in 5" 5" 5" 5" 5" 5" 3"
Overall length (§) mm 17 396 17 396 17 536 17 686 17 536 17 690 17 622
ft/in 57' 0" 57' 0" 57' 6" 58' 0" 57' 6" 58' 0" 57' 10"
Overall height with mm 11 058 11 058 11 205 11 250 10 960 10 975 12 184
bucket at full raise (§) ft/in 36' 3" 36' 3" 36' 9" 36' 11" 36' 0" 36' 0" 40' 0"
Loader clearance circle with mm 12 959 12 959 12 993 13 030 13 249 13 285 13 285
bucket in carry position (§) ft/in 42' 6" 42' 6" 42' 7" 42' 10" 43' 6" 43' 7" 43' 7"
Static tipping load straight** (§) kg 108 695 108 926 108 111 106 543 105 978 104 795 107 068
lb 239,631 240,140 238,344 234,887 233,641 231,033 236,044
Static tipping load kg 93 575 93 757 92 914 91 399 90 871 89 753 91 770
at full 40
° turn** (§)
lb 206,297 206,699 204,840 201,500 200,336 197,871 202,318
Breakout force*** (§) kN 1091 1091 1015 951 1020 957 936
lb 245,475 245,475 228,375 213,793 229,305 215,325 210,421
Operating weight** (§) kg 194 634 194 774 195 434 196 514 196 734 197 464 197 904
lb 429,094 429,403 430,858 433,239 433,724 435,333 436,303
(§) Specifications rating conform to all applicable standards recommended by the Society of Automotive Engineers. SAE standard J732c governs loader ratings
and is denoted in the chart by (§).
* Dimensions are measured to the tip of the bucket teeth to provide accurate clearance data. SAE standard specifies the cutting edge.
** Static tipping load and operating weight shown are based on standard machine configuration with 53.5/85-57 tires, full fuel tank, coolant and lubricants.
*** Measured 102 mm (4 in) behind tip of cutting edge with the bucket hinge pin as pivot point in accordance with SAE J732c.