Milton CAT 950H - Manual (Page 13)

CONTROLS. The main control panel on
the 950H is located high on the right
ROPS post - keeping everything within
reach of the operator while maintaining
visibility to the ground. Keeping all
switches and controls conveniently
placed allows better efficiency and
improved productivity all while
minimizing operator fatigue.
STEERING OPTIONS. The 950H offers a
choice of steering systems to provide
flexibility for your application.
Conventional Steering. The
conventional steering configuration
offers a low-effort hand metering unit
hydraulic steering system. Load sensing
steering directs power through the
steering system only when needed.
When not steering, more engine power
is available to generate rimpull,
breakout force, lift force, and results in
reduced fuel consumption. The steering
column tilts for maximum operator
comfort.
Command Control Steering. Command
Control Steering is a load-sensing
system that links the steering wheel and
frame angle positions to provide the
proper amount of steering control. The
speed the machine turns is proportional
to the steering wheel position. Less than
6 lb (26 N) steering effort is required by
the operator, regardless of conditions.
Full machine articulation is
accomplished with a ±70° turn of the
wheel - versus two to three 360° turns
of a conventional steering wheel. The Command Control Steering wheel
contains the forward/neutral/reverse
switch and the upshift/downshift button
- allowing the left hand to remain on
the steering wheel at all times.
Implement controls are integrated into
the right armrest so they move with the
operator.
13