Milton CAT 950H - Manual (Page 8)

• Hydraulics are easy to control with
low effort
• Maximum fuel efficiency and
flexibility in idle speeds
• Consistent horsepower regardless of
conditions
• Standard and optional features that
maximize productivity
LOAD SENSING HYDRAULICS. The
950H features a load sensing hydraulic
system that automatically adjusts to
operating conditions to provide only the
hydraulic flow required by the
implement for improved fuel efficiency.
With the new M3PC Priority
Proportional Pressure Compensation
Valve, implement control is improved
over the previous system - raise/lower
and rack back/dump can be operated
simultaneously and fine modulation is
repeatable for improved productivity.
Operators will notice enhanced ease of
operation, more rimpull into the pile
and a 20% increase in lift force.
Electrohydraulic Implement Controls.
Electrohydraulic implement controls on
the 950H provide the operator with in-
cab programmable kickouts to prevent
material spillage - improving
productivity. The implement control
console features an optional
Forward/Neutral/Reverse switch
allowing fast, easy directional changes
to reduce cycle times.
CONSTANT NET HORSEPOWER. On
many competitive machines, gross
horsepower is constant, meaning that
net engine power available for actual
work will vary based on demands made
from parasitic sources, such as air
conditioning or cooling fans.
The Cat C7 engine is electronically
configured to provide constant net
horsepower at full parasitic load
enhancing productivity and improving
fuel efficiency.
On-Demand Fan. With electronic control
of the variable speed on-demand fan,
temperature levels of the engine
coolant, transmission oil, hydraulic oil
and air inlet manifold are constantly
monitored. This data is used to control
and maintain fan speed at the level
necessary to maintain normal system
temperatures. Controlled fan speed
improves fuel efficiency, lowers noise
levels and reduces radiator plugging.
Separated Cooling System. Many
competitive loaders use cooling systems
that pull air in from the sides, through
the engine compartment and exhaust it
out the rear of the machine. The 950H
cooling system is isolated from the
engine compartment by a non-metallic
shield. The hydraulically driven,
variable speed fan draws in clean air
from the rear of the machine and
exhausts it out the sides and top of the
hood. The end results are optimal
cooling efficiency, increased fuel
efficiency, less radiator plugging and
reduced operator sound levels.
PLANETARY POWERSHIFT
TRANSMISSION. The electronic
planetary powershift transmission with
automatic shift capability is designed
and built by Caterpillar. The very
responsive, full-power speed and
directional changes provide excellent
cycle times and productivity.
VARIABLE SHIFT CONTROL. Match
transmission shifting patterns to
machine application requirements.
Variable Shift Control (VSC) improves
shift quality and fuel efficiency in
certain applications by allowing the
transmission to upshift at lower engine
RPMs.
8
Work Smart And Move More
PRODUCTIVITY