Velleman VDL50CM3 - Manual (Page 5)

VDL50CM3_v3 HQPOWER 5
5. Cleaning and Maintenance
1. All screws should be tightened and free of corrosion.
2. The housing, mounting supports and connections should not be modified or
tampered with e.g. do not drill extra holes in mounting supports, do not change
the location of the connections…
3. The electric power supply cables should be undamaged. Have this device installed
by a qualified technician.
4. Mechanically moving parts must not show any signs of wear and tear.
6. Caution
• Disconnect the device from the mains prior to maintenance.
• Use a moist cloth to clean the device and avoid the use of alcohol or solvents for
cleaning purposes.
• This device does not contain any user-serviceable parts with the exception of the
lamps. Refer to “Installing or Replacing a Lamp” under “Installation” for
further details.
• Spare parts should be ordered with your local dealer.
7. Technical Specifications
Power Supply
max. 230VAC/50Hz
Power Consumption max. 50W
Lamp 12V MR16 G6.35 Philips ® (LAMP50MF) or generic
(LAMP50/12E)
Fuse 3A/250VAC (5 x 20mm) (reference FU3N)
Dimensions Ø130 x 240mm
Weight 1.6kg
Max. Ambient Temperature
45°C
Max. Housing Temperature 130°C
Use this device with original accessories only. Velleman nv cannot be held
responsible in the event of damage or injury resulted from (incorrect) use
of this device. For more info concerning this product, please visit our
website www.hqpower.com. The information in this manual is subject to
change without prior notice.