Velleman VDPL1803MHRGB - Manual (Page 6)

VDPL1803MHRGB
V. 01 – 26/10/2012 6 ©Velleman nv
Menu item Setting Description
TC switch
TC switch
mask
ON/OFF Select OFF to enable the temperature control switch (default setting).
Always use the OFF setting.
TC switch
temp
Password protected. Do not change these settings.
Scan setting
Reverse
pan
ON/OFF
Select ON to inverse the panning direction on this device.
Select OFF to keep the normal panning direction on this device (default
setting).
Reverse
tilt
ON/OFF
Select ON to inverse the tilting direction on this device.
Select OFF to keep the normal tilting direction on this device (default
setting).
Pan
degree
630/540 Select the maximum pan range: 630° or 540° (default setting).
Scan
blackout
ON/OFF
Select ON to enable blackout during panning/tilting.
Select OFF to disable blackout during panning/tilting (default setting).
Feedback ON/OFF
Select ON to enable the pan/tilt auto-correction system (default
setting).
Select OFF to disable the pan/tilt auto-correction system (for servicing).
Dimmer curve
Square law
Square law dimming curve (default setting).
Inverse square law
Inverse square law dimming curve
S-curve
S-curve dimming curve
Dimmer speed Smooth / Fast
Select Smooth for smooth but slower dimming (default setting).
Select Fast for fast dimming.
DMX reset Enabled / Disabled
Select Enable to enable resetting the device via DMX (default setting).
Select Disable to disable resetting the device via DMX.
Fan Regulated / Full
Select Regulated to let the thermostat define the speed of the cooling
fan (default setting).
Select Full to let the fan work continuously at maximum speed.
Information
Time: hh/mm/ss Shows the software creation time.
Date: mm/dd/yy Shows the software creation date.
Use time Shows the time (in hours) the lights have been operational.
7.3 Stand-Alone Mode
In stand-alone mode, the device runs one of the built-in programs: automatic or sound-activated. You have the
following options:
Display Description
Sound-activation
possible Pan/tilt movement
possible
Macro
Custom program. See Macro Programming
for more information.
yes yes
Fade
Built-in program: changing colours, with
fade effect
yes yes
Twinkling
Built-in program: changing colours, with
strobe effect
yes yes
ChangeColor
Built-in program: changing colours, no
effects
yes yes
10000K
8500K
…
Green
Red
Various built-in, fixed colours no
no movement, stationary
default pan/tilt position