Velleman VTBAL5 - Manual (Page 3)

VTBAL5 VELLEMAN - 3 -
VTBAL5 – PARCEL SCALES – 120kg / 50g
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the
environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company
for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If the device was
damaged in transit, don't install or use it and contact your dealer.
2. Safety Instructions
• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will not
accept responsibility for any ensuing defects or problems.
• Avoid lengthy exposure to extreme heat or cold. Your scales work best when operated at normal room temperature.
Always allow the scales to acclimate to a normal room temperature before use.
• Allow sufficient warm-up time. Turn the scales on and wait for a few minutes in order to give the internal components a
chance to stabilize before weighing.
• These electronic scales are precision instruments. Do not operate near cell phones, radios, computers or other electronic
devices. These devices emit radio frequencies and may cause unstable scales reading. Try moving the scales to a
different room or location if they perform poorly.
• Avoid using the scales on a location with heavy vibration or airflow.
• Note that damage caused by user modifications to the device is not covered by the warranty.
• Keep the device away from children and unauthorised users.
3. Technical Specifications
Capacity
200g ~ 120kg
Resolution 50g
Tare Range 200g ~ 115kg
Operating Temperature 0°C ~ 40°C
Power Supply 4 x AAA batteries (order code LR03C, incl.) or external PSU (6V
AC or DC, order code PSU03R, not incl.)
Dimensions
Display 160 x 80 x 30mm
Weighing Platform 300 x 380 x 40mm
4. Description
ZERO : scales are at zero point; gross weight is 0
NET : net weight; tare weight is not 0
HOLD: scales are in HOLD mode (live weight is
displayed when flashes; reading is locked when is
steady)