Velleman VDPLP56SL User Manual
Page 5
VDPLP56SL
23.07.2010
©Velleman nv
5
• Never stand directly below the device when it is being mounted, removed or serviced. Have a qualified
technician check the device once a year and once before you bring it into service.
• Install the device in a location with few passers-by that is inaccessible to unauthorised persons.
• Overhead mounting requires extensive experience: calculating workload limits, determining the
installation material to be used… Have the material and the device itself checked regularly. Do not
attempt to install the device yourself if you lack these qualifications as improper installation may result
in injuries.
• Adjust the desired inclination angle via the mounting bracket and tighten the bracket screws.
• Make sure there is no flammable material within a 0.5 m radius of the device.
• Have a qualified electrician carry out the electric connection.
• Connect the device to the mains with the power plug. Do not connect it to a dimming pack.
• The installation has to be approved by an expert before the device is taken into service.
8. Operating Instructions
Control Panel Navigation
Access the control panel functions using the four panel buttons located directly underneath the LCD
display.
button function
<MENU>
used to access the menu or to return to a previous menu option
<DOWN>
scrolls through the menu options in descending order
<UP>
scrolls through the menu options in ascending order
<ENTER>
used to select and store the current menu or option within the menu
The control panel LCD display shows the menu items you select from the menu map. When a menu
function is selected, the display will show immediately the first available option for the selected menu
function. To select a menu item, press <ENTER>.
Use the <UP> and <DOWN> buttons to navigate the menu map and menu options. Press <ENTER> to
access the menu function currently displayed or to enable a menu option. To return to the previous
option or menu without changing the value, press the <MENU> button.
Menu Functions
menu sub-menu
function
sub-selection
description
p--
p1
7-colour
switching
-
select between 2 switching and 2 fading
built-in programs
p2
7-colour fading
p3
7-colour
switching
p4
7-colour fading
p5
7-colour sound
control
use sound
sensitivity
adjustment
knob [5]
select between 2 sound-active programs
p6
3-colour sound
control
3-ch d001-d512
-
-
select 3-channel DMX mode (RGB)
7-ch d001-d512
- -
select 7-channel DMX mode (RGB, macros,
run speed, strobe, automatic/sound,
dimmer)
c--
c1
red
-
select between 7 static colours
c2
green
c3
blue
c4
cyan
c5
magenta
c6
yellow
c7
white
s-- 5001-5100 default range
5050
-
speed range for 2 switching and 2 fading
built-in programs
u--
r---
red
000~100
combine red, green and blue to create
your own custom colour
g---
green
b---
blue