Velleman VDPLP56SL - Manual (Page 8)

VDPLP56SL
23.07.2010 ©Velleman nv 8
Unplug fixture from power. Use a soft brush to remove dust collected on external components. Clean all
glass when the fixture is cold with a mild solution of glass cleaner or isopropyl alcohol and a soft, lint-free
cotton cloth or lens tissue. Apply solution to the cloth or tissue and drag dirt and grime to the outside of
the lens. Gently polish optical surfaces until they are free of haze and lint.
The cleaning of external optical lenses must be carried out periodically to optimize light output. Cleaning
frequency depends on the environment in which the fixture operates: a damp, smoky or particularly dirty
surrounding can cause greater accumulation of dirt on the unit’s optics. Clean with soft cloth using
normal glass cleaning fluid. Always dry the parts carefully. Clean the external optics at least every 20
days.
11. Technical Specifications
power supply 230 VAC ~ 50 Hz
power consumption 12 W
LEDs 180 pcs (36x red, 36x green, 36x blue)
beam angle 21°
dimensions 223 x 184 x 178 mm
weight 1.2 kg
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulted from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual, please visit our website
www.hqpower.eu. The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.
No part of this manual or may be copied, reproduced, translated or reduced to any electronic medium or
otherwise without the prior written consent of the copyright holder.