Velleman VDPC054 - Manual (Page 4)

VDPC054
V. 02 – 11/09/2013 4 ©Velleman nv
Damage caused by disregard of certain guidelines in this manual is not
covered by the warranty and the dealer will not accept responsibility for
any ensuing defects or problems.
A qualified technician should install and service this device.
Do not switch the device on immediately after it has been exposed to
changes in temperature. Protect the device against damage by leaving it
switched off until it has reached room temperature.
This device is designed for professional use on stage, in discos, theatres,
etc. The device should only be used indoors. Use only the included power
adapter.
Frequently switching the device on and off may damage the device.
Use the original packaging if the device is to be transported.
Keep this manual for future reference.
4. Features
for small mobile applications
can be battery powered
light and compact
54 channels controlled by 6 faders
easy setup of scenes and programs.
5. Overview
Refer to the illustrations on page 2 of this manual.
1 battery compartment
2 BATTERY/EXTERNAL: power selection switch
3 power supply input
4 DMX output
5 DMX input (not used)
6 faders
7 control buttons:
INSERT: to save a scene in a program
DELETE: to delete a scene in a program
A: for program mode
B: to select pages/devices
UP/DOWN: to increase/decrease a value
(SELECT: to synchronise several DMX devices. This possibility is not
further explained in this user manual.)