Velleman VDPL300CB - Manual (Page 7)

VDPL300CB
V. 01 – 05/07/2012 7 ©Velleman nv
8. Cleaning and maintenance
• All screws should be tightened and free of corrosion.
• The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with; e.g. do not drill extra holes in
mounting supports, do not change the location of the connections…
• Mechanically moving parts must not show any signs of wear and tear.
• The electric power supply cables must not show any damage. Have a qualified technician maintain
the device.
• Disconnect the device from the mains prior to maintenance activities.
• Wipe the device regularly with a dry, lint-free cloth. Do not use alcohol or solvents.
• There are no user-serviceable parts, apart from the fuse.
• Contact your dealer for spare parts if necessary.
Replacing the fuse
Only replace the fuse by a fuse of the same type and rating.
1. Before replacing the fuse, unplug the mains lead.
2. Unscrew the fuse holder on the rear panel of the base with an appropriate screwdriver.
3. Remove the old fuse and install the new fuse in the fuse holder.
4. Replace the fuse holder in the housing and tighten it.
9. Technical Specifications
power supply 12VDC (adaptor incl.)
power consumption 30W
LEDs 6 x 3W RGB (2pcs each colour)
DMX channels 6
dimensions Ø175 x 150mm
weight 0.58kg
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulted from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our
website www.hqpower.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.