Velleman VDPLOP1810RGBW - Manual (Page 4)

VDPLOP1810RGBW
V. 01 – 22/07/2013 4 ©Velleman nv
Keep this device away from dust and extreme temperatures. Make sure the ventilation
openings are clear at all times. For sufficient air circulation, leave at least 1" (± 2.5 cm) in
front of the openings.
Protect this device from shocks and abuse. Avoid brute force when operating the device.
• Familiarise yourself with the functions of the device before actually using it. Do not allow operation
by unqualified people. Any damage that may occur will most probably be due to unprofessional use
of the device.
• All modifications of the device are forbidden for safety reasons. Damage caused by user modifications
to the device is not covered by the warranty.
• Only use the device for its intended purpose. All other uses may lead to short circuits, burns,
electroshocks, lamp explosion, crash, etc. Using the device in an unauthorised way will void the
warranty.
• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.
• Mechanical wear and LEDs are not covered by warranty.
• A qualified technician should install and service this device.
• Do not switch the device on immediately after it has been exposed to changes in temperature.
Protect the device against damage by leaving it switched off until it has reached room temperature.
• This device is designed for professional use on stage, in discos, theatres, etc.
• The device should only be used indoors.
• Use the appropriate power supply (see Technical Specifications below).
• Lighting effects are not designed for permanent operation: regular operation breaks will prolong their
lives.
• Use the original packaging if the device is to be transported.
• Keep this manual for future reference.
4. Features
• outdoor-rated, tri-colour LED wash light with a robust, extruded aluminium housing for all-weather
applications
• innovative, touch-sensitive digital display eliminates rubberized control buttons
• easy menu setting for stand-alone use
• auto-programs available
• DMX control via 4, 5, or 10 channels
• 400 Hz output
• suitable for use on camera due to the flicker-free operation
5. Overview
Refer to the illustrations on page 2 of this manual.
1 touch display 5 condensation valve (do NOT touch)
2 power in 6 DMX out
3 DMX in 7 power out
4 bracket
6. Installation
Choose a suitable mounting spot. Mount the device in the desired angle using the included bracket.
Connect the power cord to the mains. Disconnect after use.