Velleman HPDSD - Manual (Page 5)

HPDSD
V. 02 – 04/04/2013 5 ©Velleman nv
6.2 Card reader
1. Connect the device to your PC with the included USB cable.
2. Plug an SD card into the headphones' card reader.
3. Switch on the headphones.
Your PC will now read the SD card. You can use it as any other card
and copy, delete or move files.
If your PC does not read the SD card, turn off the headphones and
switch them on again.
To disconnect the headphones:

Use the "Safely remove hardware" function on your computer to
disconnect the card reader.
Not doing so might damage the card.
 Remove the USB cable from the computer.
6.3 FM radio
 Switch on the device.
To go to FM radio mode:

If you switch on the device and it does not contain a card, it will
automatically start in FM radio mode.
 If the device contains a card, press the FM/CARD button to set the
device in FM radio mode (the power indicator will turn green).
 While listening to music from a card, you can also switch to FM radio
mode with the FM/CARD button.
To start searching for the available stations:
1.
Press the PLAY/PAUSE button for about 2 seconds. The led indicator
will blink.
2. When you listen to one program playing for more than 6 seconds or
the indicator stops twinkling, searching programs is finished. The
headphones will store all the stations searched.
3. Press the PRE/NEXT button to go to the previous or next radio station.
6.4 Headphones with USB cable
1. Connect the device to your PC with the included USB cable.
2. Switch on the headphones
The power indicator is off, the charging indicator (CHE) lights up.
You can now listen to any music or movie playing on your PC.
3. Use the buttons PRE, NEXT, PAUSE/PLAY to control playback.
Note: You can use the headphones with USB cable even if your PC does not
have a sound card.