Velleman DVR16H1 User manual - Manual (Page 35)

FREQUENTLY-USED FUNCTIONS
30
5.7.3 DHCP
Note: When DHCP configuration is completed, please move to “DDNS” to
configure the DDNS service.
ADVANCED CONFIG
CANERA NETWORK SNTP FTP E-MAIL DDNS
DETECTION NETWORK TYPE DHCP
ALERT IP 192.168.001.010
NETWORK GATEWAY 192.168.001.254
DISPLAY NETMASK 255.255.255.000
RECORD PRIMARY DNS 168.095.001.001
DEVICES SECONDARY DNS 139.175.055.244
PORT 0080
EXIT
1) NETWORK TYPE
Select the network type as DHCP.
2) DNS (PRIMARY DNS / SECONDARY DNS)
Key in the IP address of the domain name server obtained from your ISP (Internet
Service Provider).
3) PORT
The valid number ranges from 1 to 9999. The default value is 80. Typically, the
TCP port used by HTTP is 80. However in some cases, it is better to change this
port number for added flexibility or security.
5.7.4 DDNS
You need to additionally set DDNS when your network type is PPPOE or DHCP.
We have our own DDNS server for quick DDNS service configuration. You don’t need to
additionally apply a DDNS service.
z To use our own DDNS server, select “default” in “SYSTEM NAME”.
z The default host name is the MAC address of the DVR.
Then, note down the whole address under “CURRENT HOST ADDRESS”, such as
[email protected]
. This is the default IP address used to access
your DVR remotely.
Note: Please at least use the default address to access your DVR remotely once.
This is to ensure our DDNS server has your DVR registered. Then, you may
change the host name to a more meaningful name to memorize later here.