Velleman LEDC04 User Manual

Ledc04

Advertising
background image

+

-

+

-

LED DIMMER INSTALLATION INSTRUCTIONS

VARIATEUR DE LED CONSIGNES DE MONTAGE

LED-DIMMER MONTAGE INSTRUCTIES

LED-DIMMER BEDIENUNGSANLEITUNG

DIMMER LED MANUAL DEL USUARIO

DIMMER LED MANUAL DO UTILIZADOR

LED DIMMER INSTALLATIONS INSTRUKTIONER

LEDC04

EN

To all residents of the European Union
Important environmental information about this product

This symbol on the device or the package indicates that disposal

of the device after its lifecycle could harm the environment. Do not

dispose of the unit (or batteries) as unsorted municipal waste; it should

be taken to a specialized company for recycling. This device should be

returned to your distributor or to a local recycling service. Respect the

local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Vellight! Please read the manual thoroughly

before bringing this device into service. If the device was damaged in

transit, don’t install or use it and contact your dealer.

Installation:

1. Connect the cable end marked “LED” to the LED strip.
2. Connect the cable end marked “5-24V” to a suitable DC power

supply.

The DC power voltage must be equal to the rated voltage of the LED

strip.
3. Press any key to switch on.

Operation:

1. MODE key: switch to automatic mode.

Press repeatedly to choose an automatic program.
2. SPEED/Brightness/Off key: adjust speed or brightness.

In automatic mode, press to change speed.

In static colour mode, press to change brightness.

Press and hold for 1 second to switch off.

In off mode, press any key to switch on and start the last selected

mode.
3. LIGHT/Brightness key: switch to static colour mode.

In static colour mode, press to change brightness.

Press and hold for 1 second to jump to maximum brightness.

FR

Aux résidents de l’Union européenne
Des informations environnementales importantes concernant ce

produit

Ce symbole sur l’appareil ou l’emballage indique que l’élimination

d’un appareil en fin de vie peut polluer l’environnement. Ne pas jeter un

appareil électrique ou électronique (et des piles éventuelles) parmi les

déchets municipaux non sujets au tri sélectif ; une déchèterie traitera

l’appareil en question. Renvoyer les équipements usagés à votre

fournisseur ou à un service de recyclage local. Il convient de respecter

la réglementation locale relative à la protection de l’environnement.
En cas de questions, contacter les autorités locales pour élimination.
Nous vous remercions de votre achat ! Lire la présente notice

attentivement avant la mise en service de l’appareil. Si l’appareil a été

endommagé pendant le transport, ne pas l’installer et consulter votre

revendeur.

Installation:

1. Connecter l’extrémité du câble marquée avec “LED” à la barrette

LED.
2. Connecter l’extrémité du câble marquée avec “5-24V” à une source

d’alimentation CC appropriée.
3. La tension CC doit être égale à la tension nominale de la barrette

LED.
4. Appuyer sur un bouton quelconque pour allumer.

Fonctionnement:

1. Bouton MODE: basculer en mode automatique.

Appuyer plusieurs fois pour choisir un programme automatique.
2. Bouton SPEED/Brightness/Off: ajuster la vitesse ou la luminosité.

En mode automatique, appuyer pour ajuster la vitesse.

En mode de couleur statique, appuyer pour ajuster la luminosité.

Maintenir enfoncé pendant 1 seconde pour éteindre.

En mode off, appuyer sur un bouton quelconque pour allumer et pour

lancer le dernier mode sélectionné.
3. Bouton LIGHT/Brightness: basculer en mode de couleur statique.

En mode de couleur statique, appuyer pour ajuster la luminosité.

Maintenir enfoncé pendant 1 seconde pour accéder directement à la

luminosité maximale.

NL

Aan alle ingezetenen van de Europese Unie
Belangrijke milieu-informatie betreffende dit product

Dit symbool op het toestel of de verpakking geeft aan dat, als

het na zijn levenscyclus wordt weggeworpen, dit toestel schade kan

toebrengen aan het milieu. Gooi dit toestel (en eventuele batterijen) niet

bij het gewone huishoudelijke afval; het moet bij een gespecialiseerd

bedrijf terechtkomen voor recyclage. U moet dit toestel naar uw verdeler

of naar een lokaal recyclagepunt brengen. Respecteer de plaatselijke

milieuwetgeving.
Hebt u vragen, contacteer dan de plaatselijke autoriteiten betreffend de

verwijdering.
Dank u voor uw aankoop! Lees deze handleiding grondig voor u het

EN

FR

NL

DE

ES

SE

PT

Advertising