Shindy 17-657B Radial Brake Master Cylinder Kits - Manual

NISSIN RADIAL BRAKE MASTER CYLINDER KIT
PART # 17-656/B/G/K (19mm Piston diameter)
PART # 17-657B (17mm Piston diameter)
**All kits are inspected for quality before it ships by the manufacturer.
**Air-bleeding is a difficult process. Because each kit is thoroughly examined for anti-leaking,
each kit is assured that it is capable of bleeding air completely, if done correctly.
*Please read the directions carefully before installation. Make sure all components are included.
Components:
Parts Quantity
○
1 Radial Master Cylinder 1
○
2 Reservoir Tank 1
○
3 Hose 1
○
4 Hose Clamp 2
○
5 Reservoir bolt (M6) 1
Parts Quantity
○
6 Tank Fixing nut (M6) 1
○
7 Reservoir Bracket 1
○
8 Mirror Holder 1
○
9 Half Clamp 1
○
10 Mirror Hole Bolt (M10) 1
Information:
-Lever angle is adjustable to 6 positions
-While installing, make sure the motorcycle is in a stable position.
-Part #17-656/B/G/K will be compatible with 5/8" diameter piston on the
standard master cylinder. The feel of the brakes may slightly change.
-Part #17-657B is compatible with standard 14mm piston.
-Depending on the model, you may need to change the Brake Hose and Banjo bolts.
-This kit only fits on 7/8" handlebars only, and no other size.
-Use banjo bolt size M10 x P1.25.
-Use a new gasket when re-installing banjo bolt.
-Use DOT 4 polyglycol ether based fluid and Do NOT use DOT 5 brake fluid or silicone
based fluid
-Brake fluid will damage painted surfaces. If spills occur, immediately wipe off.
-Immediately rinse any fluid if in contact with eyes or skin.
-Make sure that all of the air is released and that air bleeding is also done in the rubber
hose between the reservoir and master cylinder. Any air left in the whole kit may result
in poor brake function and may cause an accident.