Shindy 17-850_S_T Water Temperature Gauges - Manual

DIGITAL GAUGE
Digital WATER Temperature Gauge Part No. 17-850
OWNERS MANUAL
* Before installing the digital temperature gauge, car efully read these instructions.
USES
This gauge is designed for use on motorcycles, cars, karts, snowmobiles, etc.
Features
- Water temperature measurement capability is capable of measuring a wide range of temperatures
from -50°C to 250°C (-58°F to 482°F).
- LED Lighting allows the display to be read in the dark .
- Auto Change automatically displays the tachometer reading when the ignition is switched on and displays the
time when the ignition is switched off. (This function is available only if the red lead of the LED light cord is
connected to the lead that receives current when the ignition is switched on.)
-Celsius or Fahrenheit display allows the display to be switched between Celsius (°C) and Fahrenheit (°F)
scales.
-Compatibility with wide range of vehicles allows measurement water temperature for many vehicles.
-Sturdy and water-resistant construction is made to withstand everyday use in any weather condition.
* This item is not completely waterproof. Do not submerge in water or expose to pressurized water.
-Internal battery is a chargeable lithium battery(ML2430/3V) equipped inside the gauge, but is not
exchangeable. The fully charged internal battery allows all functions except for the LED lighting to be used if
the gauge is not connected to the vehicle's battery. LED light functions only if the gauge is connected to the
vehicle's battery or a dry cell battery purchased separately.
If the temperature gauge is connected to the vehicle's battery and the ignition is switched on, the
temperature gauge automatically begins drawing power from the vehicle's battery in order to conserve the
internal battery. While being connected to vehicle's battery or a dry-cell battery purchased separately, internal
battery is automatically charged. If the internal battery has been fully used, all displays will be reset. If this
happens, the internal battery should be charged by connecting it to an external battery (12V or 9V).
CONTENTS
Part Quantity
○
1 Digital temperature gauge 1
○
2 Sensor (PT 1/8) 1
○
3 Fastening tape (30 x 50) 1
○
4 Coupler 1
- owner's manual 1