Rough Country 1054 - Manual

JEEP JK WINCH BUMPER
Thank you for choosing Rough Country for all your suspension needs.
Please read instructions before beginning installation. Check the kit hardware against the parts list. Be sure you have all
needed parts and know where they go. Also please review tools needed list and make sure you have needed tools.
PRODUCT USE INFORMATION
Please read instructions before beginning installation. Check the kit hardware against the parts list and product layout.
Be sure you have all needed parts and know where they go. Also please review tools needed list and make sure you
have needed tools.
If questions exist we will be happy to answer any questions concerning the function and correct use of this product.
The installer must verify that the mounting kit does not interfere with the factory air bag sensors, which must not be relo-
cated or modified in any way. The vehicles air bag system may not operate properly if the winch mounting kit is not
mounted in compliance with the vehicle manufacturers recommendations.
Optional Accessories are available for the Rough Country winch bumper including: See back page for info:
Part # 1055...Stinger
Part # 1056...Light Bar / Winch Guard
Part # 1058...D-Ring Kit
Kit Contents:
1054Box1
Bumper
1054Box2
Winch
Plate
2-Flag Nuts
1054BAG1-
8-1/2” X 1 1/2” Allen Head Bolts
6-1/2” X 1” Allen Head Bolts
10-1/2” Flat Washers
8-1/2” Top Lock Nuts
2-1/2” x 1” Bolts
8-10mm Nuts
2-3/8” X 1 1/4” Bolts (For Fairlead)
2-3/8” Lock Nuts (For Fairlead)
92105400
Tools Needed:
18mm Socket / Wrench
5/16” Allen Wrench
9/16” Socket / Wrench
3/4” Socket / Wrench
Drill Motor
1/4” Drill Bit