Rough Country 720.20 - Manual (Page 7)

Thank you for purchasing a Rough Country Lowering System.
POST INSTALLATION
1. Check all fasteners for proper torque. Check to ensure there is adequate clearance between all rotating, mobile,
fixed and heated members. Check steering for interference and proper working order. Test brake system.
2. Perform steering sweep. The distance between the tire sidewall and the brake hose must be checked closely. Cycle
the steering from full turn to full turn to check for clearance.
3. Re torque all fasteners after 500 miles. Visually inspect components and re torque fasteners during routine vehicle
service.
4. Readjust headlights to proper settings and take truck in for a front-end alignment to a qualified alignment
professional.
Kit Contents
720.20-
Strut Lowering Spacer-2
Axle Flip Bracket-2
U-bolt Plate-2
U-bolts-4
9/16BAG-1
1721BAG1-1
720BAG3-1
Rear Shocks-2
Rear Hanger Brackets-2