Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Tuner- Six-Gun Diesel Tuner w_ optional Speed-Loader Module For use with Six-Gun switch Only - Manual (Page 15)

96450 v.9.0
15
Section 2:
INSTALLATION OF THE SIx-GUN SELECTOR SWITCH
Figure 11 Removal of the stereo (2003-04 model year vehicles only)
CAUTION: Do not use excessive
force when working on plastic
parts. Permanent damage to the
part might result
For 2003-04 model year vehicles,
follow the selector switch
installation procedure below. For
2005-06 model year vehicles, skip
to step 28.
22.
Remove the lower driver side
interior panel that allows access to the
fuse box.
23.
Remove the stereo using Ford
stereo removal tools as shown in
Figure 11. These are readily available
at automotive supply stores.
24.
Remove two (2) bolts that reside
above the stereo. These are accessible
once the stereo has been removed.
25.
Detach the dash. At this point
the dash is held in place entirely by
removable fasteners. Disconnect all
electrical connections on the back of
the dash once it has been detached.
26.
Remove the dash from the
vehicle.
27.
cut out the template in
Figure 12 and tape to the backside of
the dash panel as shown in Figure 13.
The template will be used as a guide
for drilling the holes to locate the Six-
Gun selector switch.
For 2003-04 model year vehicles,
skip to step 30 to finish the selector
switch installation procedure.
28.
2005-06 Automatic
Transmission vehicles: Set the
vehicle’s parking brake. Insert the
key and turn the vehicle on without
starting it. Pull the shift lever down
into first gear to allow clearance for
dash panel removal.