Figure 21 figure 22 – Banks Power Universal Car & Truck: (Gas or Diesel ’50 - 14 Universal) Water-Methanol: Straight-Shot and Double Shot, Universal applications User Manual
Page 10
Advertising
10
97650 v.1.0
Throttle
Body
Throttle
Body
Engine
Side
Inlet
Side
Injection
Nozzle
Injection
Nozzle
Injection
Nozzle
Solenoid
Check
Valve
Solenoid
“Y” Fitting
Reservoir
Reservoir
If it is implausible to posi-
tion Injection Nozzle(s) on
inlet side of Throttle Body,
vacuum siphoning can be
prevented by installation of
an Anti-Siphon Solenoid (P/N
45035), sold separately.
Double-Shot system
shown: with check valve
for first stage nozzle pre-
throttle body, high-flow
solenoid for second stage
nozzle(s) post-throttle body.
Pre-throttle body mounting
for all nozzles preferred but
not required with solenoid-
controlled stages.
Pump
Pump
Figure 21
Figure 22
Advertising
This manual is related to the following products: