Banks Power Backup Camera For use with Banks iQ 2.0 User Manual
Page 8
heat source or moving components
using supplied cable ties. Secure the
camera head to the mounting location
using the supplied sheet metal screws.
Use
The backup camera is an extreme
wide angle lense, allowing you to
view out to the sides of your vehicle.
However, a wide angle lense can also
make the range to an object difficult to
distinguish.
Make sure that the wheels of the
vehicle are blocked so that the vehicle
cannot move. Engage the parking
brake on the vehicle and turn the key
to the RUN position without starting
the vehicle. Move the shifter to the
Reverse position.
Have an assistant stand at the back
of the vehicle and gradually move
towards the rear of the vehicle. As
they approach the grid, note the
distance from the vehicle and keep
this information as a reference.
The Backup camera will now display
when the shifter is position in the
reverse gear.
-END, SECTION 3-
Figure 3
Gale Banks Engineering
546 Duggan Avenue • Azusa, cA 91702
(626) 969-9600 • Fax (626) 334-1743
Product Information & Sales: (888) 635-4565
bankspower.com