Danze DF012124 - Installation Manual - Manual (Page 3)

3 4
InStaLLatIon InStructIonS
1. Carefully position the vanity (A) in front of the
intended installation location.
Product dIMenSIonS
Level Pencil Hammer Drill
Hole Saw Phillips Screwdriver
tooLS reQuIred
(S) Flat Washers (2 each)
(J) Knob Assembly
(H) Brushed Nickel Knobs (2 each)
( I ) 1” Bolts (2 each)
(U) Touch Up Paint
(V) Welcome to Danze Kit
( W ) Installation Instructions
(X) Homeowner Care Manual
(Y) Warranty Parts Guide
Safety Glasses
33 1/4
5/16” Drill Bit