Grain Systems Unload Augers PNEG-1550 - Manual (Page 7)

Follow Safety Instructions
Carefully read all safety messages in this manual and
on your machine safety signs. Keep signs in good
condition. Replace missing or damaged safety signs.
Be sure new equipment components and repair parts
include the current safety signs. Replacement safety
signs are available from the manufacturer.
Learn how to operate the machine and how to use
controls properly. Do not let anyone operate without
instruction.
Keep your machinery in proper working condition.
Unauthorized modifications to the machine may
impair the function and/or safety and affect machine
life.
If you do not understand any part of this manual and
need assistance, contact your dealer.
Read and Understand Manual
Install & Operate Electrical Equipment Properly
To avoid serious injury or death, stay away from unit
and make sure everyone is clear of all augers before
starting or operating the unit.
Electrical controls should be installed by a qualified
electrician and must meet the standards set by the
national electrical code and all local and state codes.
Disconnect and lock out all power sources before
installing wires/cables or servicing equipment.
Do not operate electric motor equipped units until
motors are properly grounded.
Disconnect power on electrical driven units before
resetting motor overloads.
Do not repetitively stop and start the drive in order to
free a plugged condition. Jogging the drive in this type
of condition can damage the equipment.
Electric Shock Hazard
PNEG-1550 Belt Guard 7
Safety