Grain Systems Bin Accessories PNEG-1810 - Manual (Page 43)

PNEG-1810 Bin Manager Temperature Cable Support Bracket Instructions 43
8. Temperature cable support packages for commercial roofs
Commercial Roofs
1. All packages shall span three (3) roof panels.
2. Each set of rafters should carry only one temperature cable.
3. Once the commercial roof system has been installed, installation of the cable support packages may
proceed as follows.
4. Should the angle location be such that the rafter splices coincide with the angle placement, the angle
should be slide one way enough to align the angle holes with the splice bolts or miss the splice bolts.
5. If it is desired to support the cable from the flange of the support channel, it will be necessary to
reinforce the flange with a 12" section of 3" x 3" x 3/16" angle.
6. No more than one cable should be supported from a pair of roof rafters.