Manual gate installation – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-765 User Manual
Page 5
Advertising
5
PNEG-765 Gate Manual
Manual Gate Installation
Manually Operated Gate
1. Install the specified wheel to the shaft by aligning the key and key way, then tighten the set
screw. This gate can be operated by a chain, cable, or hand wheel.
2. Manual gates up to 16" wide are fitted with a single rack. Manual gates larger than 16" wide
have a double rack.
3. The slide gate plate rides on 1-3/8" double shielded radial bearings for smooth operation.
Figure 2
Hand Wheel
Shaft
Key
Gate Frame
Advertising