Grain Systems Tanks PNEG-1400 User Manual
Page 27
Advertising
3. Bin Assembly
PNEG-1400 WCL Commercial 4" Corrugation Externally Stiffened Grain Bin
27
Refer to 4" commercial tank bolting requirements for complete bolt usage on
and
.
NOTE: The only washers shipped loose with the bins in quantity are the steel flat washers. The 5/16" steel
flat washer (S-845) is used where the base angle attaches to the sheet and some are used at the
main eave clips. The 3/8" steel flat washers (S-248) are used in the roof rafter splices.
0.375" x 1.500" Hex flanged head without a plastic sealing washer.
This bolt is used to attach the flanges of the 5 gauge base stiffener to the splice plates and splice
laminated stiffeners together. A flange nut is used on the nut side of the connection.
Advertising