Speedhut CJ (Jeep) Speedometer Cluster - Manual (Page 2)

CJ GPS Speedometer Cluster
Power Draw = 0.2 Amp
5 Amp Inline Fuse Recommended
for +12 Keyed Ignition
1
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
2
GPS Antenna
1. Blue wire with White Stripe - High Beam Indicator
2. Red wire with Green Stripe - Speed Sensor
3. Green wire with Orange Stripe - Left Turn Signal
4. Black (Double Pigtail paired with wire #6) - CAN High
5. Green wire with Red Stripe - Right Turn Signal
6. Black [White Striped] (Double Pigtail paired with wire #4) - CAN Low
7. Black wire - Brake Indicator
8. Red wire with Black Stripe - GPS Hot Start (Connect to +12VDC non-keyed power).
9. Yellow wire with Black Stripe - Fuel Level Ground
10. Pink wire - Fuel Level Signal
11. Orange wire - 4x4 Indicator
12. Yellow wire with Red Stripe - Water Temp Signal
13. White (Triple Pigtail paired with wires #14 and #15) - Lighting Dimmer
14. Red (Triple Pigtail paired with wires #13 and #15) - +12VDC Switched (5 Amp Inline Fuse Recommended, Power Draw is 0.2 Amp)
15. Black (Triple Pigtail paired with wires #13 and #14) - Ground
16. Yellow wire with Black Stripe - Water Temp Ground
17. Yellow wire - Tachometer Signal (available on some models)
18. Black (Double Pigtail paired with wire #19) - EL Inverter
19. Black [White Striped] (Double Pigtail paired with wire #18) - EL Inverter
20. Purple Wire - Check Engine Indicator
- 2 -
FIGURE 2: Wiring Guide
See Figure #3 for more wiring info.
20