Speedhut CJ (Jeep) Speedometer Cluster - Manual (Page 6)

CJ GPS Speedometer Cluster - Gauge Operation Instructions
(Inclinometer calibration, GPS features)
- 6 -
2:36
000000
MI
PM
4644
000000
MI
Elevation
FT
0.0
000000
MI
Speed
MPH
N
000000
MI
Direction
DIR
0°
0°
PITCH
ROLL
2:36
000
MI
PM
PRESS TO
ADVANCE
2
0°
0°
TITLE MENU
1. NULL
2. PITCH
3. ROLL
GPS SPEEDOMETER:
When the gauge is powered on, it will begin to search for satellites to acquire a GPS signal.
After a GPS signal is aquired the screen will display “GPS ACTIVE”.
When the the GPS signal is active the following displays and menus will be available:
00000 0
000000
MI
MI
SEARCHING...
00000 0
000000
MI
MI
GPS ACTIVE
How use the “Inclinometer”: Press the button until you see the Inclinometer on the screen.
[not available on some models]
How to calibrate the “Inclinometer”:
1. Install the gauge in the vehicle.
2. Park your vehicle on level ground (i.e. a level Parking Lot).
3. Power on the gauge.
4. Press the button repeatedly until you see the Inclinometer display.
5. Press and hold the button to access the Inclinometer menu.
6.Select “1. Null” and press and hold the button. The Inclinometer display will show 0° for both pitch and roll.
7. If you desire you can set a warning point (5° to 80°) for the Pitch and/or the Roll. An alarm will sound when the vehicle tips past the
warning point.
a. Select the axis you want to set (Pitch or Roll). Press and hold to access the menu. Toggle through to set the degree.
b. Do not press the button for 5 seconds to save the setting.
To access and use the on screen menu:
Press the button (located on the front of the gauge) to select different options.
Press and hold the button to gain access to an option or menu selection.
Front to Rear Axis
Left to Right Axis
Elevation feature is acquired from GPS satellites and shows the current elevation from sea level in feet or meters depending on model.
Speed feature shows mph or kmh in display
Shows the current direction
Note: Default direction is North(N). Correct direction is displayed only when moving.
Clock
Clock feature. Time is acquired from GPS satellites. User only needs to adjust the hour setting for his/her time zone.
Press and hold button to set clock hours. (color will invert)
Toggle through am / pm hours until correct time is reached.
Release button for several seconds and time is stored. (color will return to normal)