Sunpak PZ42X - Manual (Page 5)

14
LCD Panel Indicators
1
AUTO OK indicator
When the subject is located within the auto operation effective range, the AUTO OK indicator lights for
about 2 seconds from the moment of light emission. If the AUTO OK indicator does not light, approach the
subject or use an F-value with a longer effective range.
Even when the subject is located within the effective range, the AUTO OK indicator may not light
depending on the density (reflectance) of the subject.
It should be remembered that the effective range is decreased if the light is emitted immediately after
the Ready lamp lights up
2
Power ratio
This refers to the light intensity adjustment.
ᱺ Format indicators
᱾ Mode indicators
᱾ Power Ratio indicator
AUTO OK indicator
1
ᱽ ZOOM mode indicator
Wide Panel
operation indicator
Focal distance
indicator
Interlocked range
indicator
ᱻ
ᱼ EV correction + indicator
EV correction – indicator
EV correction value indicator
Power ratio correction value indicator