Sunpak PZ42X - Manual (Page 6)

15
English
Setup Press the MODE button to switch the setting modes.
zPress the power button of this unit to “ON”.
Press to switch the mode (operations indicated with ) and to select the option button (operations indicated with ).
Point The backlight lights for 10 seconds (the mode can be switched while it is lit).
Rear panel of the unit
35mm DIGITAL blinks Format setting DIGITAL (APS-C size) SEL 35mm (35 mm size) DIGITAL
MODE
EV + blinks Positive correction setting SEL
MODE
EV – blinks Negative correction setting SEL
MODE
ZOOM blinks Zoom setting A (Auto zoom) SEL
35 mm film size equivalence
MODE A (Auto zoom) SEL
APS-C size
M blinks PR setting SEL
MODE PR: Power Ratio (light intensity) can be set (1/1 to 1/64).
TTL lights TTL setting Setting according to the TTL mode of the camera.