Turbosmart BLOW OFF & BYPASS VALVE KITS - Dual Port for: Subaru WRX (08+), Liberty_Legacy, Mazdaspeed_MPS 3, 6, CX7 - Manual (Page 2)

2
2) Locate the intake standard BOV. Remove the vacuum/pressure source.
3) Remove the bolts securing the standard BOV and then remove the plumb back hose by removing the spring clamp.
4) Push the plumb back hose onto the plumb back fitting on the new BOV. Use the factory bolts to fit the new BOV onto the
intercooler pipe. Remember to install the supplied gasket in between the BOV flange and the intercooler flange. Reinstall the
vacuum/pressure source to the nipple.
5) Replace the engine cover. Start the engine and check for leaks.