Turbosmart BLOW OFF & BYPASS VALVE KITS - Dual Port for: Subaru WRX (08+), Liberty_Legacy, Mazdaspeed_MPS 3, 6, CX7 User Manual
Page 4
Advertising
4
3) Installation on a Liberty GT – Setting notch 2
1) Remove engine cover by removing the 4 securing screws.
2) Locate standard BOV and remove the plumb back hose and the vacuum/pressure source line.
3) Remove standard BOV.
4) Cut the raised circle area on the engine cover using appropriate cutting tools
Advertising
This manual is related to the following products: