Moog Music MF-103 12-Stage Phaser - Manual (Page 14)

LIMITED WARRANTY
Moog Music warrants that its products will be free from defects in materials or
workmanship, and shall conform to specifications current at the time of
shipment, for a period of one year from date of purchase. During the one-year
period, any defective products will be repaired or replaced, at Moog Music's
option, on a return-to-factory basis. This Warranty covers defects that Moog
Music determines are no fault of the user.
RETURNING YOUR MF-103 FOR REPLACEMENT/REPAIR
You must obtain prior approval and an RMA number from Moog Music before
returning any product to us. Wrap your MF-103 carefully and pack it with the
power adaptor in its original carton. The warranty will not be honored if the
product is not properly packed. Then send it to Moog Music (UPS is
recommended) with transportation and insurance charges paid.
A reasonable cost for service and for materials and return freight will be
charged to replace materials defective through the fault of the user, or for
which the one year warranty period has expired.
Transportation and insurance charges from Moog Music to your United States
address, of products repaired or replaced under warranty, will be paid by Moog
Music.
MF-103 SPECIFICATIONS
DESCRIPTION:
Analog effects module incorporating two functions: 6-stage/12-stage phaser,
and wide-range low frequency oscillator (LFO).
FRONT PANEL FEATURES:
RATE rotary control,- varies the LFO’s frequency over a 250:1 range.
AMOUNT rotary control,- adjusts the amount by which the LFO output varies the
phaser sweep.
SWEEP rotary control,- moves the phaser frequency response over a six-octave
range.
RESONANCE rotary control,- adjusts the height and sharpness of the peaks of the
phaser frequency response.
DRIVE rotary control,- adjusts the gain of the audio input to the phaser.
OUTPUT LEVEL rotary control,- balances the phaser signals with the bypassed
signal.
LO-HI rocker switch, which chooses between the low LFO range (0.01Hz to 2.5Hz)
and the high LFO range (1.0Hz to 250Hz.).
LEVEL, a three-color LED that is used to set the DRIVE control.
LFO, a LED that indicates the LFO rate.