Moog Music MF-103 12-Stage Phaser User Manual
Page 15
BYPASS, a two-color indicator LED that tells whether the phaser is active or
bypassed.
ON/BYPASS, a rugged, smooth-acting ‘stomp switch’.
JACK PANEL FEATURES:
AUDIO IN ¼” phone jack – accepts any instrument-level or line-level signal from
–16 dBm to +4 dBm. Input impedance is one megohm.
AUDIO OUT ¼” phone jack - -4 dBm nominal maximum output level; +8dBm
absolute maximum output level. Output impedance is 5,000 ohms.
AUX OUT ¼” phone jack – 4 dBm nominal maximum output level; +8 dBm
absolute maximum output level. Output impedance is 5,000 ohms.
RATE, AMOUNT, SWEEP, RESONANCE, all of which are stereo ¼” jacks that accept
moogerfooger EP1 (or equivalent) expression pedals, or control voltages from
two-circuit or three-circuit ¼” jacks.
SWEEP IN ¼” phone jack – provides a means of applying an external ±2.5 volt
control signal to the second 6-section phasing circuit, in place of the LFO. Input
impedance is 50,000 ohms.
LFO OUT ¼” jack - delivers the LFO waveform (triangular wave; ± 2.8 volts) for
use by other voltage-controlled devices. Output impedance is 600 ohms.
+9V POWER INPUT jack – accepts standard 9-volt power adaptors
GENERAL SPECIFICATIONS
CASE: Black panel with hardwood sides – classic analog appearance.
DIMENSIONS: 9” x 6” x 2-1/2”
NET WEIGHT: 2 lb
SHIPPING WEIGHT: 4 lb, including power adaptor and instruction manual
POWER REQUIREMENTS: 120 volt, 5W. 220 volt power adaptor available on
special order
MOOG MUSIC Inc. 554C RIVERSIDE DRIVE ASHEVILLE, NC 28801
Phone: (828) 251 0090 FAX: (828) 254 6233 Email: [email protected]
WEB SITE: http://www.moogmusic.com
Entire Contents © 1999, 2003 by Moog Music, Inc.