Moog Music Animoog for iPhone - Manual (Page 11)

EFFECTS mODULES CONT.
RECORD mODULE
Touch the RECORD tab on the right to access
the RECORD module.
Set the record tempo using the BPM/Tap
Tempo Control.
Tap the RECORD button. A countdown timer counts
off four beats before recording begins. The RECORD
button displays a white ring to indicate the amount of
recording time remaining.
Touch the RECORD button again to end the current
recording and automatically transition into Overdub
mode. From this point you can overdub a sound, or
press STOP to end your recording.
NOTE: The RECORD button also clears the memory
Buffer.
OVERDUb: Allows you to record additional audio over
a previous recording stored in the Buffer.
Press the OVERDUb button and then press PLAY to
record on top of the audio file in the Buffer. You can also
press
PLAY and then touch the OVERDUb button at any time.
Touch the STOP button to stop recording.
bUFFER CONTROLS
The Buffer stores a good take or mix so that an overdubbed performance can
be replaced if desired. Audio in the Buffer is stored as a clipboard.wav, which
can be copied and exported to another app. See
AUDIOCOPY and AUDIO-
PASTE section.
COPY: Copies the current record Buffer audio to the clipboard.
PASTE: Places the current contents of the clipboard into the Buffer.
CLEAR: Clears the Buffer.
NOTE: Copy and Paste functions can also be used to move audio between Ani-
moog and other apps that support the AudioCopy/AudioPaste standards.