Factory default settings – Cobalt Digital COMPASS 9032 HD_SD 12-bit Analog to Digital Converter User Manual
Page 16
Advertising
Page 16 of 26
9032 Owner’s Manual
••••
(V 2.1)
Software Build Number
A read only indication of the software build number. Software build number is an internal indicator
used by Cobalt engineers to differentiate different software builds.
Factory Default Settings
The factory default settings are as follows
1)
The proc module is enabled, but all parameters are set to unity.
2)
The Frame Sync is disabled, reference 1 or 2 must be chosen to enable the frame sync.
Advertising