Cobalt Digital COMPASS 9032 HD_SD 12-bit Analog to Digital Converter - Manual (Page 20)

Page 20 of 26 9032 Owner’s Manual •••• (V 2.1)
Technical Specifications
Table 4. Card - Technical Specifications
Category Parameter Specification
Number of Inputs 3
Input Type Differential, Common Mode Rejection (5V AC)
Video Inputs HD: Component YPbPr and RGB
SD: Composite, Component YPbPr (BetaCam™,
MII™, SMPTE/N10), RGB, and Y/C
Conversion Bit Depth 12-Bits
SD Color Separation 5-Line Adaptive Comb or Notch Filter
Frequency Response HD: Y- 0-30MHz ± 0.25db PbPr 0-15 MHz ±
SD: Y- 0-30MHz ± 0.25db PbPr 0-15 MHz ±
Differential Phase SD: < ±0.4° typical
Differential Gain SD: < ±0.4% typical
Noise < -64dB (Luma Flat Field)
< -61dB (Luma Ramp)
Analog Front End Crosstalk Within Noise Floor Measurement
Analog Video
Input
Return Loss > 20dB to 30MHz
Number of Outputs 2:HD/SD-SDI BNC per IEC 60169-8 Amendment 2
Impedance 75
Ω
Return Loss > 15 dB at 5MHz – 270MHz
> 12 dB at 270MHz – 1.485GHz
Signal Level 800 mV ±10%
DC Offset 0 Volts ±50 mV
Jitter HD: < 0.15UI (all outputs)
SD: <0.06UI (all outputs)
Serial Digital
Video Outputs
Overshoot <0.2% of amplitude