RocketFish RF-GUV1124 - Quick Setup Guide - Manual (Page 2)

2
Rocketfish RF-GUV1124
Powerline Networking Kit
Safety information
Take the following precautions when using this product:
• Read all instructions before installing and operating.
• Keep all instructions for later reference.
• Follow all warnings and instructions.
• This product should not be installed in any electrical socket so that
the product’s venting holes are pointing downward.
• Use a dry cloth for cleaning. Unplug the device from the power
outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners.
• Do not operate this product near water.
• Do not place this product near or over a radiator or heat register.
• This product relies on the building’s electrical installation for
short-circuit (over-current) protection.
• Do not allow anything to rest on the product’s power plug. Do not
locate this product where the cords may be stepped on.
• Because this product sends data over power lines, we recommend
that you plug it directly into a power outlet. Do not plug the device
into a UPS (uninterruptible power supply) or power strip with surge
protection. The product has its own power filter for protection
against surges.
• Only a qualified technician should service this product. Opening or
removing covers may result in exposure to dangerous voltage
points or other risks.
• Unplug the product from the power outlet and refer the product to
qualified service personnel for the following conditions:
• When the power cords are damaged or frayed.
• When liquid has been spilled into the product.
• When the product has been exposed to rain or water.
• When the product does not operate normally when the
operating instructions are followed.
• When the product exhibits a distinct change in performance.
10-0764 GUV1124-EN.fm Page 2 Wednesday, November 3, 2010 10:21 AM