RocketFish RF-GUV1124 - Quick Setup Guide - Manual (Page 9)

9 RF-GUV1124
Setting up your powerline network
Choosing a location
Before connecting your powerline devices, you need to determine
where they need to be installed.
Notes:
• Make sure that the two powerline devices are in the same home
power circuit.
• These devices should be installed only in a residential setting. Do
not install in a business environment.
Powerline Ethernet bridge
To use this kit to set up Internet
access for your home network,
you should install the bridge
near the router that’s connected
to your modem. For security, we
recommend that you connect
your bridge to the router, and
not directly to the modem.
For more information on your
network’s modem or router, see
the modem or router’s
documentation.
10-0764 GUV1124-EN.fm Page 9 Wednesday, November 3, 2010 10:21 AM