TC Electronic D-Two - Manual (Page 10)

8
REAR PANEL
IN
UL6500
EN/IEC 60065
PROFESSIONAL AUDIO EQUIPMENT
THRU IN LEFT LEFT RIGHT RIGHT OUT
MIDI BALANCED INPUTS BALANCED OUTPUTS DIGITAL I/O PEDAL
DI
DO
S/PDIF
SERIAL NO.
TYPE: MAN001
TC ELECTRONIC
MADE IN THAILAND WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR.
100-240VAC
50-60Hz, 15W
CAUTION
R
C US THIS CLASS B DIGITAL DEVICE MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE- CAUSING EQUIPMENT REGULATIONS AND COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION SUBJECT TO CONDITIONS STATED IN THE MANUAL.
RISK OF ELECTRIC SHOCK DO NOT OPEN
Balanced
Jack
Analog
Inputs Pedal
Input MIDI
In/Out/Thru Balanced
Jack
Analog
Outputs Digital
S/PDIF
Input/
Output Power
Input
100 - 240V Serial
Number
Sleeve - Pin 1 (Ground)
Tip - Pin 2 (Hot)
Ring - Pin 3 (Cold) Sleeve - Pin 1 (Ground)
Tip - Pin 2 (Hot)
Sleeve - Pin 3 (Cold)
Jack (unbalanced) - XLR Jack (balanced) - XLR
TIP
RING
GND TIP
GND
MIDI Cable
DIN CONNECTOR
5POLE - MALE
45 degrees DIN CONNECTOR
5POLE - MALE
45 degrees
max. 10m
SHIELDED CABLE (3 or 5 wires + screen)
(Use Left Input
for Mono
connection)