Recall, Factory/user presets, Recalling a preset – TC Electronic Finalizer 96k User Manual

Page 12

Advertising
background image

12

Preset banks

Factory

presets

Your own

presets

The Finalizer contains two different preset banks. A RAM bank

and a ROM bank.

Finalizer PLUS :

The ROM bank holds 28 presets

The RAM bank holds up to 128 presets.

Finalizer 96 :

The ROM bank holds 30 presets

The RAM bank holds up to 128 presets.

The RAM preset bank is located after the ROM bank. This means

that you scroll through the ROM presets to enter the RAM bank.

For fast RAM/ROM access use the BLOCK keys

to switch between the two banks.

Note: When previewing in the RAM bank you will not see the

empty RAM spaces.

Factory/User presets

RECALL

Select which blocks to load from

new preset.

Preset name

Preset number

ROM bank RAM bank

Recalling a preset

Press the RECALL key in the Program section and

scroll through the presets using the ADJUST wheel.

Press OK to recall when you find the desired preset.

You are able to search for another preset before recalling it. This

is called previewing. Until you press OK you are previewing. At

this point your OK key is blinking, indicating that the preset dis-

played is not yet recalled (active).

The Recall Display

In the Recall display, you will see an information section at the

bottom of the screen. In this section you are able to see which

blocks are activated in the current preset. In the upper right

corner, you see an indication of which bank you are previewing.

Partial Recall

It is also possible to recall separate sections of a preset. This is

extremely useful when you want to combine, let’s say your

favorite settings of the Normalizer from one preset, with your

favorite EQ settings from another preset.

Exercise 1:

How to make a Partial Recall

Scenario: You love preset no. 3 but would like to use the

Normalizer from ROM preset no. 6.

- Select ROM preset no. 3.

- “All “ is now highlighted (transparent) in the Recall display.

- Use the PARAMETER keys to select the Normalizer block.

- Use the ADJUST wheel to select ROM preset no. 6

and press OK.

The Normalizer from preset no. 6 is now recalled into

preset no. 3.

Short info about the preset

128 RAM

PRESETS

28/30 ROM

PRESETS

Advertising