Nuc140 series data sheet – Rainbow Electronics NUC140 User Manual
Page 9
NUC140 Series DATA SHEET
Publication Release Date: May 31, 2010
- 9 -
Revision V1.02
• ADC
–
12-bit SAR ADC with 800ksps
–
Up to 8-ch single-end mode or 4-ch differential mode
–
Single scan/single cycle scan/continuous scan
–
Each channel with individual result register
–
Scan on enabled channels
–
Threshold voltage detection
–
Conversion start by S/W, external pins
–
Support PDMA Mode
• Analog
Comparator
–
2 comparator analog modules
–
External input or internal bandgap voltage selectable at negative node
–
Interrupt when compare result change
–
Power down wake up
•
One built-in temperature sensor with 1℃ resolution.
• Brown-out
detector
–
With 4 levels: 4.5V/3.8V/2.7V/2.4V
–
Support Brownout Interrupt and Reset option
•
One built-in LDO
•
Low Voltage Reset
•
Operating Temperature: -40℃~85℃
• Packages:
–
All Green package (RoHS)
LQFP 100-pin / 64-pin / 48-pin