Rainbow Electronics MAX6902 - Manual (Page 3)

MAX6902
SPI-Compatible RTC in a TDFN
_______________________________________________________________________________________ 3
AC ELECTRICAL CHARACTERISTICS
(V CC = +2.0V to +5.5V, T A = -40 °C to +85°C. Typical values are at V
CC = +3.3V, T A = +25 °C, unless otherwise noted.) (Figure 5,
Notes 1, 4)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
OSCILLATOR
X1 to Ground
Capacitance
25 pF
X2 to Ground
Capacitance
25 pF
SPI SERIAL TIMING
Maximum Input Rise
Time
t rIN DIN, SCLK, CS 2 µs
Maximum Input Fall
Time
t fIN DIN, SCLK, CS 2 µs
Output Rise Time t rOUT DOUT, C LOAD = 100pF 10 ns
Output Fall Time t fOUT DOUT, C LOAD = 100pF 10 ns
V CC = +2V 1000
SCLK Period t CP
V CC = +5V 238
ns
SCLK High Time t
CH
100 ns
SCLK Low Time t CL 100 ns
SCLK Fall to DOUT
Valid
t DO C LOAD = 100pF 100 ns
DIN to SCLK Setup
Time
t DS 100 ns
DIN to SCLK Hold
Time
t
DH
2 ns
SCLK Rise to CS
Rise Hold Time
t CSH 2 ns
CS High Pulse Width t CSW 200 ns
CS High to DOUT
High Impedance
t CSZ 100 ns
CS to SCLK Setup
Time
t CSS 100 ns
Note 1: All parameters are 100% tested at T A = +25°C. Limits over temperature are guaranteed by design and characterization and
not production tested.
Note 2: I CC is specified with DOUT open, CS = DIN = GND, SCLK = 4MHz at V CC = +5V; SCLK = 1MHz at V CC = +2.0V.
Note 3: Timekeeping current is specified with CS = V CC , SCLK = DIN = GND, DOUT = 100k Ω to GND.
Note 4: All values referred to V IH min and V IL max levels.