Pin description – Rainbow Electronics MAX9860 User Manual

Page 13

Advertising
background image

MAX9860

16-Bit Mono Audio Voice Codec

______________________________________________________________________________________

13

Pin Description

PIN

NAME

FUNCTION

1

MICBIAS

Microphone Bias. +1.55V microphone bias for internal and/or external microphone. An external resistor from
2.2k

Ω to 470Ω should be used to set the microphone current. Bypass to MICGND with a 1µF capacitor.

2

REG

Internal Bias. PREG/2 voltage reference. Bypass to AGND with a 1µF capacitor (+0.8V).

3

PREG

Positive Internal Regulated Supply. Bypass to AGND with a 1µF capacitor (+1.6V).

4

REF

Converter Reference (1.23V). Bypass to AGND with a 2.2µF capacitor.

5

AGND

Analog Ground

6

AVDD

Analog Power Supply. Bypass to AGND with 10µF and 0.1µF capacitors.

7

OUTP

Positive Headphone Output

8

OUTN

Negative Headphone Output

9

SDA

I

2

C Serial-Data Input/Output

10

SCL

I

2

C Serial-Data Clock

11

DVDDIO

Digital Interface Power Supply. Supply for digital audio interface. Bypass to DGND with a 1µF capacitor.

12

DGND

Digital Ground

13

DVDD

Digital Core Power Supply. Bypass to DGND with a 1µF capacitor.

14

MCLK

Master Clock Input

15

SDOUT

Serial Audio Interface ADC Data Output

16

SDIN

Serial Audio Interface DAC Data Input

17

LRCLK

Serial Audio Interface Left/Right Clock

18

BCLK

Serial Audio Interface Bit Clock

19

IRQ

Interrupt Request. IRQ is an active-low open drain output. Pull up to DVDDIO with a 10k

Ω resistor.

20

MICRN

Negative Right Microphone Input. AC-couple to low-side of microphone or connect to negative signal.
AC-couple to ground for single-ended operation.

21

MICRP

Positive Right Microphone Input. AC-couple to high-side of microphone or connect to positive signal.
AC-couple the signal for single-ended operation.

22

MICLN

Negative Left Microphone Input. AC-couple to low-side of microphone or connect to negative signal.
AC-couple to ground for single-ended operation.

23

MICLP

Positive Left Microphone Input. AC-couple to high-side of microphone or connect to positive signal.
AC-couple the signal for single-ended operation.

24

MICGND

MICBIAS Ground. Connect to AGND.

EP

Exposed Pad. Connect to AGND.

Advertising