Rainbow Electronics AT25256A User Manual

Page 7

Advertising
background image

7

AT25128A/256A [Preliminary]

3404A–SEEPR–10/03

WRITE ENABLE (WREN): The device will power-up in the write disable state when V

CC

is applied. All programming instructions must therefore be preceded by a Write Enable
instruction.

WRITE DISABLE (WRDI): To protect the device against inadvertent writes, the Write
Disable instruction disables all programming modes. The WRDI instruction is indepen-
dent of the status of the WP pin.

READ STATUS REGISTER (RDSR): The Read Status Register instruction provides
access to the status register. The READY/BUSY and Write Enable status of the device
can be determined by the RDSR instruction. Similarly, the Block Write Protection
bits indicate the extent of protection employed. These bits are set by using the WRSR
instruction.

WRITE STATUS REGISTER (WRSR): The WRSR instruction allows the user to select
one of four levels of protection. The AT25128A/256A is divided into four array segments.
Top quarter (1/4), top half (1/2), or all of the memory segments can be protected. Any of
the data within any selected segment will therefore be READ only. The block write pro-
tection levels and corresponding status register control bits are shown in Table 4.

The three bits, BP0, BP1, and WPEN are nonvolatile cells that have the same properties
and functions as the regular memory cells (e.g. WREN, t

WC

, RDSR).

Table 2. Status Register Format

Bit 7

Bit 6

Bit 5

Bit 4

Bit 3

Bit 2

Bit 1

Bit 0

WPEN

X

X

X

BP1

BP0

WEN

RDY

Table 3. Read Status Register Bit Definition

Bit

Definition

Bit 0 (RDY)

Bit 0 = 0 (RDY) indicates the device is READY.
Bit 0 = 1 indicates the write cycle is in progress.

Bit 1 (WEN)

Bit 1 = 0 indicates the device

is not

WRITE ENABLED. Bit 1 = 1 indicates

the device is WRITE ENABLED.

Bit 2 (BP0)

See Table 4.

Bit 3 (BP1)

See Table 4.

Bits 4 - 6 are 0s when device is not in an internal write cycle.

Bit 7 (WPEN)

See Table 5.

Bits 0 - 7 are 1s during an internal write cycle.

Table 4. Block Write Protect Bits

Level

Status Register Bits

Array Addresses Protected

BP1

BP0

AT25128A

AT25256A

0

0

0

None

None

1(1/4)

0

1

3000 - 3FFF

6000 - 7FFF

2(1/2)

1

0

2000 - 3FFF

4000 - 7FFF

3(All)

1

1

0000 - 3FFF

0000 - 7FFF

Advertising