Rainbow Electronics AT25DF081 - Manual (Page 37)

37
3674E–DFLASH–8/08
AT25DF081
16. Revision History
Revision Level – Release Date History
A – September 2007 Initial release
B – October 2007
Changed part number ordering code to reflect NiPdAu lead finish
- Changed AT25DF081-SSU-1.8 to AT25DF081-SSH-1.8
- Changed AT25DF081-MU-1.8 to AT25DF081-MH-1.8
Added lead finish details to Ordering Information table
C – December 2007
Changed description from “1.8-volt Only Serial Firmware DataFlash” to “1.65-volt
Minimum SPI Serial Flash”
Removed 8-ball dBGA
Changed Deep Power-Down current values
- Increased typical value from 4 µA to 8 µA
- Increased maximum value from 8 µA to 14 µA
Changed typical Chip Erase time from 6 sec to 8 sec
Updated Ordering Information table and changed part numbering scheme
Changed 8Y7 package to 8MA1 package
D – January 2008
Added 11-ball dBGA (WLCSP)
Updated Ordering Information table
E – August 2008 Removed “Preliminary” status from the datasheet
F – November 2012 Updated to Adesto logos.